How To Put Up Hardie Board In Shower

Hardie board is a cement board that is often used in place of drywall in wet areas, such as showers. It is a durable and water-resistant material that is easy to install. In this article, we will walk you through the steps on how to put up Hardie board in a shower.

Materials you will need:

Hardie board
Cement board screws
Drill
Screwdriver
Tape measure
Level
Caulk gun
Caulk

Instructions:

1.Measure and cut the Hardie board: Measure the area where you will be installing the Hardie board and cut it to size using a saw.

2.Apply a layer of thin-set mortar: Spread a thin layer of thin-set mortar to the wall where you will be installing the Hardie board using a trowel.

3.Set the Hardie board in place: Carefully set the Hardie board in place on the wall and press it firmly into the thin-set mortar.

4.Screw the Hardie board in place: Use cement board screws to secure the Hardie board to the wall. Space the screws evenly apart, about 6 inches apart.

5.Caulk the seams: Apply a bead of caulk to the seams between the Hardie board and the wall. This will help to seal the seams and prevent water from leaking through.

6.Let the thin-set mortar dry: Allow the thin-set mortar to dry completely before using the shower.

7.Install the shower fixtures: Once the thin-set mortar is dry, you can install the shower fixtures, such as the shower head and faucet.

Tips:

Make sure that the wall is clean and dry before installing the Hardie board.
Use a level to ensure that the Hardie board is installed level.
Caulk all of the seams between the Hardie board and the wall to prevent water from leaking through.
Allow the thin-set mortar to dry completely before using the shower.