How To Measure A Shower Enclosure

How to Measure a Shower Enclosure

Measuring a shower enclosure correctly is essential for ensuring a perfect fit. Here's a comprehensive guide to help you with the process:

Step 1: Determine Shower Enclosure Type

Identify the type of shower enclosure you have or plan to install. The primary types include:

Single-panel shower screens
Two-panel shower screens
Three-panel shower screens
Corner shower enclosures
Walk-in showers

Step 2: Measure the Wall-to-Wall Depth

Measure the distance from the wall where the shower enclosure will be installed to the opposite wall. This will determine the depth of the enclosure.

Step 3: Measure the Wall-to-Wall Width

Measure the distance between the side walls where the shower enclosure will be installed. This will determine the width of the enclosure.

Step 4: Measure the Height

Measure the distance from the shower tray or floor to the desired height of the shower enclosure. This will determine the height of the enclosure.

Step 5: Measure the Radius for Corner Shower Enclosures

If you have a corner shower enclosure, measure the radius from the corner point to the edge of the shower tray or floor. This will determine the size of the curved panel.

Step 6: Measure the Walk-In Width

For walk-in showers, measure the clear opening width of the entrance. This will determine the width of the wider panel.

Step 7: Allow for Clearance

It's crucial to allow for clearance when measuring. Ensure there is at least 5-10mm clearance around the edges of the enclosure for installation tolerances and thermal expansion.

Step 8: Record Measurements

Record all the measurements accurately. A clear sketch or diagram can also be helpful. Double-check the measurements before placing an order.

Tips for Accurate Measuring

* Use a measuring tape or laser level for precise measurements. * Mark the reference points with tape or a pencil. * If possible, remove any existing shower fixtures to improve accuracy. * If you're unsure about measuring accurately, consider seeking professional assistance from a contractor or supplier.

Conclusion

Measuring a shower enclosure is a straightforward process with the right approach. By following these steps carefully and allowing for clearance, you can ensure a perfect fit for your new shower enclosure. Remember, accurate measurements are essential for a successful installation and a satisfying showering experience.