How To Install Shower Door Splash Guard

By | March 16, 2024

How to Install a Shower Door Splash Guard: A Comprehensive Guide

Installing a shower door splash guard is a sensible and relatively easy task that can enhance the functionality and aesthetics of your bathroom. A splash guard serves as a protective barrier, preventing water from escaping the shower area and onto the bathroom floor. Follow these comprehensive instructions to effortlessly install a splash guard:


  • Shower door splash guard
  • Measuring tape
  • Level
  • Pencil or marking tool
  • Drill
  • Screwdriver


  1. Measure and Mark: Lay the splash guard on the inside of the shower door and adjust its position to ensure proper coverage. Use a measuring tape and level to mark the desired drill holes.
  2. Pre-drill Holes: Using a drill, create pilot holes at the marked locations. Pre-drilling prevents the glass from cracking when the screws are inserted.
  3. Apply Sealant: Apply a thin bead of silicone sealant around the perimeter of the splash guard base.
  4. Secure the Splash Guard: Align the splash guard with the pre-drilled holes and carefully secure it using the provided screws. Tighten the screws firmly but avoid over-tightening.
  5. Level and Adjust: Use a level to ensure the splash guard is installed horizontally and adjust it accordingly if necessary.
  6. Cure the Sealant: Allow the sealant to cure for the recommended time as stated on the product instructions. This ensures a watertight seal.
  7. Clean Up: Remove any excess sealant and clean the splash guard with a damp cloth to restore its shine.