A linear shower drain is a great way to add a modern and stylish look to your bathroom without having to make any major renovations. Installing a linear shower drain is a relatively straightforward process, and can be done in a few hours with a few basic tools. In this article, we’ll explain the steps involved in installing a linear shower drain so you can complete the project with ease.
What You’ll Need
Before you begin, you’ll need to make sure you have the right tools and materials. Here’s a list of what you’ll need:
- Linear shower drain
- Caulking gun
- Silicone sealant
- Drill
- Masking tape
- Carpenter’s level
- Trowel
- Sealant tape
- Screwdriver
- Tile adhesive
Step 1: Prepare the Shower Drain
The first step is to prepare the shower drain for installation. Start by wiping down the entire surface with a damp cloth to ensure that the surface is free of debris. Next, use a sealant tape to create a watertight seal around the drain. This will help to prevent any water from leaking out of the drain.
Step 2: Mark the Location
Once the shower drain is prepared, it’s time to mark the location of the drain. Use a carpenter’s level to make sure the drain is level. Mark the location with a pencil or marker, then use a drill to make the necessary holes in the shower floor.
Step 3: Apply Tile Adhesive
Once the holes are drilled, it’s time to apply the tile adhesive. Use a trowel to spread the adhesive evenly over the surface of the shower floor. Make sure the adhesive is completely covering the surface of the shower floor before moving on to the next step.
Step 4: Install the Drain
Now that the tile adhesive is in place, it’s time to install the drain. Place the drain into the holes you drilled earlier, then use a screwdriver to secure the drain in place. Make sure the drain is level and use a carpenter’s level to check. Once the drain is secured, use a caulking gun to apply silicone sealant around the edges of the drain.
Step 5: Finish the Installation
The last step is to finish the installation. Use a damp cloth to wipe away any excess sealant and tile adhesive. Allow the sealant to dry completely before using the shower. Once the sealant is dry, your linear shower drain is ready to use!
Related Posts