A curbless shower is a modern and stylish upgrade to your bathroom that can make your showering experience much more enjoyable. It can also help improve the accessibility of your bathroom, making the showering process easier for those with mobility issues. Building a curbless shower is a relatively simple process that can be done by most DIYers with a few basic tools and materials. Read on to learn more about how to build a curbless shower in your own home.
Gather Required Materials
The first step in building a curbless shower is to gather all of the necessary supplies. You will need:
- A shower pan
- A waterproofing membrane
- Trowel
- Utility knife
- Caulk
- Grout
- A drain kit
- Tile
Prepare the Shower Area
Before you can begin building your curbless shower, you need to prepare the shower area. This includes removing any existing fixtures, such as the old shower pan, and ensuring that the floor and walls are level and clean. You should also make sure that the area is dry and free of debris.
Install the Shower Pan
The next step is to install the shower pan. You will need to measure the area where the pan will go and then cut the pan to size using a utility knife. You should then use a trowel to spread a thin layer of mortar on the floor where the pan will go. Place the pan on top and press it firmly into the mortar.
Install the Waterproofing Membrane
Once the pan is in place, you can install the waterproofing membrane. This is a critical step as it will help prevent water from getting underneath the pan and causing problems. Start by cutting the membrane to size and then apply it to the floor and walls of the shower area, making sure to overlap the edges and seal it with caulk.
Install the Drain Kit
The next step is to install the drain kit. You will first need to cut a hole in the shower pan for the drain. Then, fit the drain into the hole and use a waterproof sealant to ensure it is secure. Finally, attach the drain to your home’s plumbing and ensure that it is properly connected.
Tile the Shower
The final step in the process is to tile the shower. Begin by laying the tiles in the desired pattern and then use a trowel to spread grout over the tiles. Allow the grout to dry and then use a damp cloth to wipe away any excess. Your new curbless shower is now ready to use!
Related Posts
