How To Replace A Shower Stall Pan

How to Replace a Shower Stall Pan

Replacing a shower stall pan can seem like a daunting task, but with the right tools and materials, it's a project that can be completed in a day. Follow these steps to get the job done right:

Step 1: Gather your tools and materials

You'll need the following tools and materials to replace your shower stall pan:

New shower stall pan
Caulk gun
Silicone caulk
Carpenter's level
Putty knife
Utility knife
Tape measure
Pry bar
Hammer
Screwdriver

Step 2: Remove the old shower stall pan

Start by removing the old shower stall pan. To do this, you'll need to pry the pan up with a pry bar. Be careful not to damage the shower walls or floor when removing the pan.

Step 3: Clean the shower stall base

Once the old shower stall pan is removed, you'll need to clean the shower stall base. Use a putty knife to scrape away any old caulk or adhesive. Then, wash the base with a cleaner and rinse it with water.

Step 4: Install the new shower stall pan

Now it's time to install the new shower stall pan. To do this, you'll need to apply a bead of silicone caulk around the perimeter of the pan. Then, set the pan in place and press it down firmly. Once the pan is in place, you'll need to level it using a carpenter's level. Use shims to level the pan if necessary.

Step 5: Secure the shower stall pan

Once the pan is level, you'll need to secure it in place. To do this, you'll need to drill holes around the perimeter of the pan and insert screws. Be sure to use screws that are long enough to penetrate the shower stall base.

Step 6: Caulk the shower stall pan

Finally, you'll need to caulk the shower stall pan. Apply a bead of silicone caulk around the perimeter of the pan and the base of the shower walls. Use a caulk gun to apply the caulk and smooth it out with your finger.