Removing a shower pan can be a tricky task. If you’re not careful, you could cause a lot of damage. But with the right tools and techniques, you can successfully remove a shower pan without any problems. Here are some tips to help you get the job done.
Gather Your Tools
Before you begin, you’ll need to gather some tools and supplies. You’ll need a flat-head screwdriver, a putty knife, a caulking gun, a drill, a hammer, and a pair of safety glasses. You’ll also need a sheet of plywood, some caulk, and a tarp to protect your floor.
Prepare the Work Area
Before you begin, you’ll need to prepare the work area. Start by covering the floor with the tarp to protect it from any mess. Then, place the sheet of plywood beneath the shower pan. This will give you a stable surface to work on.
Remove the Shower Pan
Now it’s time to remove the shower pan. Start by using the flat-head screwdriver to remove the screws that hold the pan in place. Then, use the putty knife to loosen the caulk that’s holding the pan in place. Finally, use the drill to remove the remaining screws and bolts. Once that’s done, the pan should come loose. Carefully lift the pan out and place it on the plywood.
Clean Up
Now that you’ve removed the shower pan, you’ll need to clean up. Start by using the hammer to remove any remaining screws and bolts. Then, use the putty knife to remove any remaining caulk. Finally, use the caulking gun to apply a new sealant to the area. When you’re finished, the area should be clean and ready for a new pan.
Related Posts